SIKA TP 37 Serie Manuel D'utilisation page 55

TP 37 / TP 3M Calibration
6.2 Calibration Without Certificate
 In the main screen, Tap Calibration Without Certificate.
 Select the (14) calibration function and enter a (15) test point.
 Tap (17) Start.
The test point will be approached and held.
 Enter a new test point if necessary.
 Tap Stop to stop the calibration.
6.2.1 Setup the Integrated Measuring Instrument
 Connect the DUT to the integrated measuring instrument ( p. 46).
 Tap (16) Setup integrated measuring instrument.
 Configure the DUT.
 Close the view with (18) Cancel.
Technical changes reserved - 55 -