Publicité
Les langues disponibles
Les langues disponibles
User Interface
5
User Interface
After switching on the calibrator, the main screen appears after some time:
Perform a quick calibration. You only need to select the calibration function and enter a
Perform a calibration with a previously defined test task. After the calibration, you will
Manage your test tasks, devices under test and calibration functions ( p. 49).
View the results of your calibrations with a certificate. You can also export the certifi-
Set the name, language, temperature unit, sound output and decimal places for a user.
Set the date, DUT averaging time and IP address of the calibrator. You can also import
or export a backup, switch OPC mode on or off and choose between the standard or a
Activate or deactivate remote access. You can use remote control to operate the cali-
The following communication protocols are available: OPC UA, serial communication
- 48 -
Calibration Without Certificate
test point. No certificate is created ( p. 55).
Calibration With Certificate
receive a test certificate, which you can export ( p. 55).
cates as a PDF file or the raw data as a CSV file to a USB flash drive.
The name of the user is indicated on the test certificate.
customised template for the certificates.
View current information about your calibrator.
Calibration Setup
View Calibration Results
User Settings
Settings
Remote Control
brator remotely.
and HTTP.
Information
© SIKA • Ba_TP37-TP3M • 10/2023
TP 37 / TP 3M
Publicité
