Billy Goat BCR3628BVECE Manuel Du Propriétaire page 81

(11) Folding frame
The folding frame is intended to prevent the machine from rolling over by 180° if for any reason it loses
stability and rolls on to its side. The folding frame has 2 positions:
Under no circumstances is it permitted to demount the machine's protective
frame!
(12) Mowing deck elevation adjustment lever
The lever serves to set the elevation height of the mowing deck from the ground.
When travelling without mowing the lever must be set to the transport position!
The mulching function can be improved on BCR3628BVECE 4x4 machines by using
a special accessory, a so-called „mulching set", which is supplied separately as a special
accessory for mowing maintained lawns.
The lever has 4 working positions. The higher the lever position, the
higher the vegetation height that remains after mowing. The position values
based on the mowing deck model are:
Machine BCR3628BVECE (GC 92):
55 - 82 - 110 – 138 mm, which corresponds to the mowing height of 5.5
to 13.8 cm.
Machine BCR4328BVECE (GC 110) and GC 132:
45 - 70 - 98 – 130 mm, which corresponds to the mowing height of 4.5
to 13 cm.
There is also 1 transport position, which is:
- 165 mm above the ground for machine BCR3628BVECE (GC 92)
- 158 mm above the ground for the BCR4328BVECE (GC 110) and GC
132 machines
When the lever is set to the transport position it is not possible to engage
the mowing deck as a safety switch is built into this position.
81
(1) Working
Always use this position during work and when
travelling to/from the work location.
(2) Auxiliary for handling the machine
To tilt the frame, first take the cotter pins out of
the pins, remove the pins and tilt the top part
of the frame downwards. Reinsert the pins and
secure in place with cotter pins.