Billy Goat BCR3628BVECE Manuel Du Propriétaire page 109

ES STATEMENT OF COMPLIANCE (original)
pursuant to: Council Directive No. 2006/42/EC (Government directive NV 176/2008 Coll.)
Council Directive No. 2014/30/EU (Government directive NV 117/2016 Coll.)
Council Directive No. 2000/14/EC (Government directive NV 9/2002 Coll.)
A. We:
branch:
Corporate number:
B. Mechanical equipment
- name:
- model:
- serial number:
Description:
The GC 132 is a four-wheel self propelled riding mower with a Kawasaki FS 730 V engine. The
power from the engine is transferred by a V-Belt to the travel drive transmission delivering
power to all 4 wheels with a continuously variable gear and through an electromagnetic clutch
to the mowing deck. The mowing deck is a three-rotor assembly with a vertical axis of rotation
and a coverage width of 132 cm. It always has a pair of fixed blades on a single rotor. The
mowed material is dispersed on the ground.
C. Legislation forming the basis for assessment of compliance:
ČSN EN ISO 12100, ČSN EN ISO 5395-1,3, ČSN EN ISO 14982:2009
D. Assessment of compliance was performed according to the designated procedure in:
- EP and Council Directive No. 2006/42/EC, Annex VIII,(eqv.Annex no. 8, NV No. 176/2008 Coll.)
- EP and Council Directive No. 2014/30/EU, Annex II,(eqv.Annex no. 2, NV No. 117/2016 Coll.)
- EP and Council Directive No. 2000/14/EC, Annex VI,(eqv.Annex no. 5, NV No. 9/2002 Coll.)
E. Compliance assessment performed by an accredited laboratory:
Státní zkušebna strojů a.s. (SZZPLS, a.s.)
Třanovského 622/11, 163 04 Prague 6 Řepy, Czech Republic
F. We confirm that:
- this mechanical equipment meets all respective provisions of the aforementioned directives (NV)
- measures have been taken to ensure the compliance of all products introduced to the market
with the technical documentation and the requirements contained in technical regulations.
- guaranteed emission level of acoustic power L
Measured mean values of acoustic power depending on the engine used:
Engine
Kawasaki FS 730V
Technical Documentation in the scope pursuant to annex VII for the Directive 2006/42/EC a pursuant
to annex VI for the Directive 2000/14/EC is kept at the place of business of the manufacturer at the
address:
SECO Industries, s.r.o.
Jungmannova 11
506 48 Jičín
In Jičín, on 20. 4. 2019
Seco Industries, s.r.o., Podnikatelská 552, Běchovice, 190 11 Praha 9
02 Jičín, Jungmannova 11
60193450
issue the following statement:
Riding mower
GC 132
under supervision of the notified entity
Státní zkušebna strojů a.s. (SZZPLS, a.s.), NB 1016
Třanovského 622/11
163 04 Prague 6 Řepy, Czech Republic
Speed (min
director of the engineering plant division
105 dB
WAG
Measured level of acoustic power
)
-1
3100
Ing. Aleš Housa
109
L [dB(A)]
WA
100