Create WIND RATTAN Mode D'emploi page 6

ENGL ISH
Thank you for choosing our ceiling fan. Before using the appliance, and to ensure the best
use, carefully read these instructions.
The safety precautions enclosed herein reduce the risk of death, injury and electrical shock
when correctly adhered to. Keep the manual in a safe place for future reference, along with
the completed warranty card, purchase receipt and package. If applicable, pass these in-
structions on to the next owner of the appliance. Always follow basic safety precautions and
accident-prevention measures when using an electrical appliance. We assume no liability for
customer failing to comply with these requirements.
Before using any electrical device, carefully read the basic safety
measures:
• This appliance is not intended for use by persons with physical, sensory
or mental disabilities, or by persons with a lack of experience and knowl-
edge, unless they are supervised or have received instructions regarding
its safe use and understand the potential hazards associated with it.
• Children do not recognize the dangers associated with operating a ceil-
ing fan. Keep them away from the fan.
• Do not expose the ceiling fan to rain or moisture. Do not operate the ceil-
ing fan outdoors or with wet hands.
• Use only CREATE replacement parts.
• All wiring must be in accordance with ANSI/NFPA 70 local and national
electrical standards. If you are not familiar with wiring, please contact a
qualified electrician for your installation.
• To reduce the risk of bodily injury, attach the fan directly to the support-
ing structure of the building following these instructions and use only
the supplied hardware.
• To avoid possible electrical shock, before installing the fan, disconnect
power by turning off the circuit breakers at the outlet box and the asso-
ciated wall switch location. If you cannot lock the circuit breakers in the
off position, place a prominent notice, such as a tag, on the service panel.
• To reduce the risk of bodily injury, do not bend the blade mounting sys-
tem when installing, balancing, or cleaning the fan. Never insert foreign
objects between the rotating fan blades.
• To reduce the risk of fire, or motor damage, do not use a solid state speed
control with this fan. Use only CREATE speed controls.
Note: Important safety precautions and instructions in this manual are not
intended to cover all conditions and situations that may occur. When in-
stalling and operating this fan, common sense and caution are necessary.
E NGL I SH
6
SECURITY INSTRUCTIONS