Bodet Profil 750 Manuel D'installation Et De Mise En Service page 54

5.3 Time and synchronisation configuration page
The Time Configuration page is divided into two parts. One is used to set the time zone, the other to
set the synchronisation mode.
The information displayed is described below:
- Time zone: using the drop-down menu, it is possible to choose the time zone (summer/winter time
is managed automatically according to the selected time zone). It is also possible to configure a time
zone not set by default in the drop-down menu ("PROG").
When "PROG" is selected in the drop-down menu, this function can be used to define the time,
month, rank and fixed day for changes of season:
- NTP Mode: used to choose among three mode types:
o Unicast: In Address IP 1, enter the IP address of the NTP server. In this case, the clock queries
the NTP server.
Furthermore, it is possible to create a redundancy (if the first server does not reply, the second
one is queried, etc.). This is why it is possible to enter up to five server addresses (IP Address
1/2/3/4/5).
54
EN