Publicité
Les langues disponibles
Les langues disponibles
1. INITIAL CHECKS
Thank you for choosing a Bodet clock. This product has been carefully designed to ensure your
satisfaction, adhering to ISO9001 and ISO14001 quality processes.
We recommend that you read this manual carefully before installing the product.
Retain this manual throughout the lifespan of your product so that you can refer to it when
necessary.
Failure to observe these instructions may cause irreversible damage and invalidate the warranty.
In that case, BODET cannot be held liable.
Non-contractual data. BODET reserves the right to make functional, technical or aesthetic
changes to the clocks, without prior notice.
This manual is subject to change without notice. To obtain the latest version of this documentation,
please refer to our website: www.bodet-time.com.
These instructions relate to "NTP" models. For other models, please refer to the
corresponding instructions.
The illustrations and pictures in these instructions feature the Profil 760 model.
1.1 Unpacking the clock
Carefully unpack the clock and check the contents of the package. This must include:
– The clock (with label on the Ethernet port indicating the product's MAC address) and this manual
or a quick start guide,
– three stud bolts and three wall plugs for mounting a single-sided clock onto a wall.
Version: on the back of the clock is a label stating the version of the clock and its electrical
characteristics.
NTP: the clock is a receiver controlled by a master clock or an NTP time server.
Depending on the clock model (Profil 750, 760 or 780) the position of the components inside
the clock may change.
1.2 Cleaning
Use an anti-static product. Never use alcohol, acetone or other solvents which may damage the
clock's casing or glass. After manipulating the clock, the seals should be cleaned before applying a
silicone oil to make it easier to open and close the clock.
1.3 Prerequisites
For the commissioning of clocks, you must install the "BODET Detect" software.
This software is available for download by clicking on the icon below.
Download the
Bodet Detect software:
Note: In the case of a clock version with a PoE power supply, the network socket to which the
BODET clock is connected must be PoE through the use of a PoE switch or a PoE injector.
We recommend the following brands:
PoE injectors: Zyxel, Tp Link, D-Link, HP, Cisco, Axis, ITE Power Supply, PhiHong, Abus,
Globtek.
PoE switches: D-Link, HP, Planet, Zyxel, Cisco, NetGear, PhiHong.
34
EN
Publicité
