Publicité
Les langues disponibles
Les langues disponibles
5. PRESENTATION OF THE WEB SERVER
There are two ways to access the web interface and configure the clocks:
1/ Open a web browser page, then enter your clock's IP address in the search bar.
2/ Use the "BODET Detect" software, then click on the "Web browser access" button to open the
web server (please refer to the software manual 607586).
The BODET Detect software can be used to:
- detect clocks present on the network,
- individually configure each clock or copy the parameters of one clock to a group a clocks,
- update the clock software,
- check the clock status,
- access the download of the MIB files.
5.1 Homepage
The homepage of the clock's web server provides a general summary of the clock information.
The information is displayed as follows:
- Product: type of product + HM or HMS (Hour-Minute / Hour-Minute-Seconds) + SS or DS (Single
Sided / Double Sided)
- Name : user-defined clock name,
- Synchro: synchronisation status (Strat 3 indicates that the clock is at the third "level" from the
synchronisation source) + IP address of the server on which the clock is synchronised.
Example:
Strat 0
GPS antenna
Local Date: current date
Local Time: current time
52
Strat 1
Master clock
EN
Strat 2
Profil 760
Publicité
