Publicité
Les langues disponibles
Les langues disponibles
2.2.2.2 NTP PoE model
Run the Ethernet cable
1
through the bracket arm
(crimp and test the cable if
necessary).
Connect this cable to the
2
electronic card via the
Ethernet port.
Connect
the
3
battery cable (if available)
to the electronic card.
2.2.2.3 Lighting option
Run a mains cable through the
1
bracket arm, then connect this cable
to the terminal block in the L-N-
terminals reserved for lighting
(icon
).
Attach this cable to the central
2
bracket with a cable retainer.
backup
Ethernet cable
NTP
Ø 1,5 mm
2
230 V
EN
47
Publicité
