Disposal And Recycling - LawnMaster GT1415 Guide D'utilisation

14" dual line grass trimmer
Masquer les pouces Voir aussi pour GT1415:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING
If your grass trimmer
r
below. If this does not solve the problems, please call 1-866-384-8432
WARNING
Before proceeding, switch off and unplug.
The machine will not work
• Check that the power cord is properly connected and that there is power going to trimmer.
• If the machine will not work despite the voltage supply being OK, send it to the specified after-sales
service address.
Tool runs slowly
• Check that the spool housing can rotate freely. Carefully clean it if necessary.
• Check that the cutting line does not protrude more than 4 inches from the spool housing. If it does,
cut it off so that it just reaches the line trimming blade.
Automatic line feed does not work.
• Keep the tabs depressed and remove the spool cover from the housing.
• Pull the cutting line until it protrudes 4 inches from the housing. If insufficient cutting line is left on
the spool, install a new spool of cutting line as instructed above.
• Align the tabs on the spool cover with the cut outs in the housing.
• Pushing the cover onto the housing until it snaps securely into place.
• If the cutting line protrudes beyond the trimming blade, cut it off so that it just reaches the blade.
• If the automatic line feed still does not work or the spool is jammed, try the following suggestion:
• Carefully clean the spool cover and housing.
• Remove the spool and check if the lever can move freely.
• Remove the spool and unwind the cutting line, then wind it on neatly again as describe above.
Replace the spool as instructed.

Disposal and recycling

• The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw
material and can therefore be reused or can be returned to the raw material system.
• The unit and its accessories are made of various types of material, such as metal and plastic.
Defective components must be disposed of as special waste. Ask your dealer or your local council.
seems not to operate properly, follow the instruction
16

Publicité

Table des Matières
loading

Table des Matières