LawnMaster GT1415 Guide D'utilisation page 12

OPERATION
Hint for optimum use
• In order to achieve optimum cutting results, only cut dry grass.
Trimming
• Hold the grass trimmer as show.
• Gently swing the trimmer from side to side .
• When cutting long grass, work in stages from hard objects and delicate pants.
• If the grass trimmer starts running slowly, reduce the load.
Adjusting cutting head angle (See Fig.10)
• Depress the button and move the shaft to the lowest position, the shaft will rotate to the 4
position, while release the button. When the shaft is in position, the button will lock into place.
Using the Edge Guide (distance bracket) (See Fig. 11)
• If necessary the distance bracket can be swung down until it engages. Use the distance bracket,
for example, to cut around plants.
IF GRASS BECOMES WRAPPED AROUND STRING HEAD SHAFT:
• Stop trimmer.
• Unplug the string trimmer.
• Remove the grass.
NOTE: Always remove any debris that becomes wrapped around the shaft.
NOTE: This trimmer is NOT meant for ANY attachments whatsoever!!
(See Fig. 9)
Fig. 9 Fig. 10
12
Fig. 11