Publicité
Les langues disponibles
Les langues disponibles
5 Installation
5.1 Installation conditions
► Install the unit so that the object to be detected is within the specified
measuring range�
The unambiguity range of the sensor is fixed to 20 m� Objects outside the
measuring range will be suppressed up to the limit of the unambiguity range (20
m)�
Reflecting objects in the direct beam path of the sensor – also in the
range < 20 m – are to be avoided by the customer� Otherwise the
measured values can be ambiguous�
5.2 Mounting accessories
The unit is supplied with mounting accessories�
2x Metal lock nuts
6 Electrical connection
The unit must be connected by a qualified electrician�
► The national and international regulations for the installation of electrical
equipment must be adhered to�
► Ensure voltage supply to EN 50178, SELV, PELV�
cULus, Supply Class 2
► Disconnect power�
► Connect the unit as follows:
2: OUT2: switching output
4: OUT1: switching output / IO-Link
Core colours of sockets:
1 = BN (brown), 2 = WH (white), 3 = BU (blue), 4 = BK (black)
34
1
L +
2
4
3
L-
2
1
3
4
Publicité
