Conrad Electronic WS 1600 Notice D'emploi page 55

Setting the HIGH and the LOW outdoor temperature alarm
The high and low outdoor temperature alarm can be set independently of one anoth-
er to ON or OFF.
Alarm HIGH
symbol
Alarm ON
symbol
Setting the outdoor temperature alarm value (alarm value HIGH or LOW)
In normal display mode, press the alarm button twice. The display of the outdoor
temperature alarm will appear.
Press and hold the SET button for approx. 2 seconds. The temperature display starts
blinking. To set the outdoor temperature alarm value HIGH, press the + - or the
MIN/MAX button. (Keeping the button depressed advances the values faster).
Press ALARM for confirmation. The display stops blinking. Now press SET to turn
the alarm ON or OFF. (The symbol (*) means that the alarm was set.)
Press the ALARM button once. The outdoor temperature LOW display will appear.
Press and hold the SET button for approx. 2 seconds. The temperature display
begins to flash. To set the outdoor temperature alarm value LOW, press the + - or the
MIN/MAX button. (Keeping the button depressed advances the values faster).
Press ALARM for confirmation. The display stops blinking. Now press SET to turn
the alarm ON or OFF. (The symbol (*) means that the alarm was set.)
Press the HISTORY button or wait approx. 30 seconds for the automatic return to
normal display mode.
In case the temperature reaches a value that fulfills the alarm conditions for a HIGH
or LOW alarm, both the display value as well as the corresponding symbol (HI AL/LO
AL) start to blink. The buzzer will sound for approx. 2 minutes. By pressing any key,
the user can stop the buzzing sound.
Setting the HIGH and the LOW outdoor air humidity alarm
The high and low outdoor air humidity alarm can be set independently to ON or OFF
.
Setting the outdoor air humidity alarm value (alarm value HIGH or LOW)
In normal display mode, press the alarm button four times. The display of the out-
door air humidity alarm will appear.
All manuals and user guides at all-guides.com
53