Conrad Electronic WS 1600 Notice D'emploi page 51

All manuals and user guides at all-guides.com
Setting the wind speed units
blinking
You can display the wind speed in km/h (kilometers per hour) or mph (miles per hour)
or m/s (meters per second). (Factory setting: km/h).
Use the + - or the MIN/MAX button to switch between the units km/h, mp/h or m/s.
Press SET for confirmation.
Setting the rain quantity units
blinking
You can display the total rain quantity in mm or inches. (Factory setting: „mm")
Use the + - or the MIN/MAX button to switch between the units mm or inches.
Press SET for confirmation.
Setting the relative air pressure units
blinking
You can display the relative air pressure units in hPa (hektopascal) or inHg (Inch mer-
cury column). (Factory setting: hPa)
Use the + - or the MIN/MAX button to switch between the units hPA or inHG.
Press SET for confirmation.
Setting the relative reference air pressure
After inserting the batteries, the relative reference air pressure of the barometer of
your weather station is 1013PA.
For exact measuring, it is necessary to initially calibrate the barometer to the local
relative air pressure (depends on the local height above sea level). Find out the cur-
rent air pressure in your region (local weather service, Internet, optical shop, calibrat-
ed displays in public buildings or at the airport, etc.).
For better reference, the relative air pressure can be set to a manual value in a range
from 919 to 1080 hPa (27.17 to 31.90 inHg).
blinking
49