24 Main Parts
24 Main Parts
2
1
3
4
12
11
10
1 Screw Plug
2 Spark Plug Boot
3 Carburetor Adjusting Screws
4 Water Attachment
5 Chain Sprocket Cover
6 Chain Sprocket
7 Chain Tensioner
8 Guide Bar
9 Diamond Abrasive Chain
10 Muffler (with Spark Arresting Screen)
11 Front Hand Guard
12 Front Handle (Handlebar)
13 Decompression Valve –(Automatically Clos‐
ing)
14 Starter Grip
15 Fuel Filler Cap
16 Master Control Lever
17 Throttle Trigger
18 Throttle Trigger Lockout
19 Rear Handle
20 Rear Hand Guard
# Serial Number
0458-761-8221-B
#
9
8
7
5
13
14
15
18
16
19
17
24.1
Definitions
1 Screw Plug
For removing filter cover.
2 Spark Plug Boot
Connects the spark plug with the ignition
lead.
3 Carburetor Adjusting Screws
For tuning the carburetor.
4 Water Attachment
For connection of water supply.
5 Chain Sprocket Cover
Covers the sprocket.
6 Chain Sprocket
The toothed wheel that drives the diamond
abrasive chain.
7 Chain Tensioner
Permits precise adjustment of chain tension.
8 Guide Bar
Supports and guides the diamond abrasive
chain.
9 Diamond Abrasive Chain
20
A loop consisting of diamond segments, tie
straps and drive links.
10 Muffler (with Spark Arresting Screen)
Muffler reduces engine exhaust noise and
diverts exhaust gases away from operator.
Spark arresting screen is designed to reduce
the risk of sparks.
11 Front Hand Guard
Helps prevent left hand from touching the
chain if it slips off the handlebar.
12 Front Handle (Handlebar)
Handlebar for the left hand at the front of the
machine.
13 Decompression Valve –(Automatically Clos‐
ing)
Temporarily releases compression pressure
to make starting easier – when activated.
14 Starter Grip
The grip of the pull starter, for starting the
engine.
15 Fuel Filler Cap
For closing the fuel tank.
16 Master Control Lever
Lever for choke control, starting throttle, run
and stop switch position.
17 Throttle Trigger
Controls the speed of the engine.
18 Throttle Trigger Lockout
English
27