Stihl GS 461 Notice D'emploi page 26

English
The following maintenance intervals apply for normal operat‐
ing conditions only. The specified intervals must be shortened
accordingly when working for longer than normal or under dif‐
ficult cutting conditions (extensive dust, etc.).
Cooling air intake slits
Cylinder fins
Carburetor
Spark plug
All accessible screws, nuts
and bolts (not adjusting
2)
screws)
Safety information label
1)
STIHL recommends STIHL servicing dealer
2)
During initial use, tighten the cylinder block screws after 10 to 20 hours of operation
3)
When diamond abrasive chain is mounted or changed
26
Have replaced by servicing
1)
dealer
Clean
Clean
Check idle adjustment –
chain must not rotate
Adjust idle speed
Adjust electrode gap
Replace after 100 operating
hours
Tighten
replace
23 Maintenance and Care
X
X X
X X
X
X
X
X
X
0458-761-8221-B