Publicité
Les langues disponibles
Les langues disponibles
8. Water - Drain/Change
Step 1
Remove the stopper above the water tank.
Step 2
Place the pump's inlet rod in a bucket. Insert
the suction hose into the opening of the
water tank and suck in the water with 4 to 5
pumping movements.
Due to the difference in altitude, the water
would run in the bucket by itself.
Attention:
Make sure that the bucket does not hold the
entire amount of water at once and could
overflow. Empty the bucket in between if
necessary.
Note: To change the water, you only have to drain 50% of the water and replace it with fresh water.
Publicité
