VOLTCRAFT VC871 Mode D'emploi page 96

17.5 Measurement tolerances
Accuracy in ± (% of reading + display error in counts (= number of smallest
points)). These accuracy readings are valid for one year at a temperature of
+23 °C (± 5 °C) and relative humidity of less than 80 % (non-condensing). If the
multimeter is used outside of this temperature range, use the following coefficient
to calculate the accuracy. +0.1 x (specified accuracy)/1 °C
The accuracy of measurements may be affected when the device is used in a high-
frequency electromagnetic field.
Direct voltage (V/DC)
Range
60.000 mV*
600.00 mV*
6.0000 V
60.000 V
600.00 V
1000.0 V
*Only available in "mV" mode
1000 V overload protection; impedance: 10 MΩ
The multimeter may display ≤10 counts if a measurement input is short-
circuited.
The LoZ low impedance measurement is not specified.
96
Resolution
0.001 mV
0.01 mV
0.0001 V
0.001 V
0.01 V
0.1 V
Accuracy
±(0.2% + 30)
±(0.08% + 5)
±(0.08% + 6)
±(0.08% + 6)
±(0.1% + 6)
±(0.15% + 6)