VOLTCRAFT VC871 Mode D'emploi page 86

Torch Time
Cont Threshold
Set Time
Set Date
Date Format
Compare Type
Compare Min
Compare Max
Record Num
Record Rate
Factory Reset
Device Info
12.10 Torch function
The multimeter features two integrated white LED lamps. These LED lamps serve
as torches.
Keeping the button ">" with the torch symbol pressed for approx. 2 seconds ac-
tivates the torch function. The function buttons "F1" to "F4" can also be used to
activate this function.
F1 TORCH
F2 FRONT
F3 BACK
F4 EXIT
86
Torch switch-off time (Always ON = disabled).
Acoustic continuity test threshold
(1 - 1000 Ω)
System time setting (hours:minutes:seconds)
Date setting
Date Format (DD = day, MM = month, YY = year)
Comparison type (INNER = within tolerance, OUTER =
outside tolerance)
Lower tolerance limit
Upper tolerance limit
Number of stored values (1 - 10000 values)
Storage interval (1 - 10000 s)
Restore factory settings
System information display
activates and deactivates the torch function.
activates the LED lamp on the front side
activates the LED lamp on the rear side
exits the torch menu