Publicité
Les langues disponibles
Les langues disponibles
To switch the multimeter back on, move the control dial over the "OFF" position or
press the "SELECT" button.
The automatic shut-off feature can be adjusted using the setup function and disa-
bled manually.
12.6 COMP function
The COMP function allows automatic comparison of measurements with preset
limits. Hence, it allows quick evaluation of measurements during time-intensive
measurement series.
12.7 RECORD function
The RECORD function allows mobile recording of measurements via the Bluetooth
interface on the measurement app installed on your smartphone or tablet.
12.8 SELECT function
Some measurement modes have sub-modes (e.g. AC/DC). The sub-modes are
marked around the control dial. To switch to a sub-mode, press the "SELECT" but-
ton. Press the button again to switch to the next sub-mode.
12.9 SETUP function
The setup menu serves to configure various system parameters according to your
needs. To select the setup menu, press the "SELECT" button. To open or close
the setup menu, press and hold the button "SELECT" for approx. 2 seconds. The
function buttons "F1" and "F2" serve to navigate through the menu. They are used
to select the menu items.
Use the two arrow buttons "<" and ">" to select the fields you wish to set.
Use the function buttons "F3" and "F4" to change values.
To exit the setup menu, press and hold the button "SETUP" for approx. 2 seconds.
Brightness
Sound
Color Mode
Auto Power Off
Display
Key Light
Display backlight
Button tones
Display theme (light/dark)
Automatic shut-off (Always ON = disabled)
Display backlight switch-off time
Position illumination on the control dial
®
85
Publicité
