Publicité
Les langues disponibles
Les langues disponibles
11.12 Temperature measurement
During temperature measurement, only the temperature probe
may be exposed to the temperature to be measured. The working
temperature of the measuring instrument must not be exceeded or
fallen short of, otherwise measurement errors may occur.
The contact temperature probe may only be used on stress-free
surfaces.
All K-type thermocouples can be used for temperature measurement. The tem-
peratures can be displayed in °C or °F. The enclosed wire probe is suitable for
the range -20 to +230°C. With optional probes, the entire measurement range
(-40 to +1000 °C) can be used.
Switch on the DMM and select the
measuring function "°C°F".
Plug the enclosed wire thermo-
couple into the °C (+) and COM (-)
measurement sockets with correct
polarity.
The temperature value with the
corresponding unit appears in the
display.
Switching from °C to °F is done via
the „SELECT" key.
As soon as „OL" (for overload) ap-
pears in the display, you have ex-
ceeded the measuring range.
If no probe is connected, the device
temperature is displayed via the
internal probe.
Remove the probe from the measuring object after the end of the measurement
and switch off the DMM.
80
COM
-
+
Publicité
