10 Display elements and symbols
The following symbols and letters appear on the device/display. Other symbols may
appear on the display (display test), but these have no function.
True RMS
True effective measurement
Δ
D elta symbol for relative measurement (= reference measure-
ment).
M
Mega symbol (exp. 6)
k
Kilo symbol (exp. 3)
Ω
Ohm (unit of electrical resistance)
Hz
Hertz (unit of frequency)
n
Nano symbol (exp. -9)
µ
Micro symbol (exp. -6)
m
Milli symbol (exp. -3)
V
Volt (unit of electrical voltage)
A
Ampere (unit of electrical current)
F
Farad (unit of electrical capacity)
W
Watt (unit of active power)
VA
Volt-ampere (unit of apparent power)
COSФ/PF
Cos phi (unit of power factor)
Wh
Watt-hour (unit of electrical energy)
mAh
Milliampere-hour (unit of electric charge)
°C/°F
Degrees Celsius / Degrees Fahrenheit (unit of temperature)
REL
Relative measurement button (= reference measurement)
SELECT
Switches to sub-mode
SETUP
Setup menu
BLE
Enable Bluetooth
HOLD
Freezes the current measurement
OL
Overload; the measurement range was exceeded
Check inPut
Warning message "Wrong measurement socket selection".
interface
®
67