Burkert 8400 Mode D'emploi page 16

All manuals and user guides at all-guides.com
 proGramminG Wall-mounted temperature controller 8400
.1 General recommendations
Keep in mind that the process may be influenced by all the parameter
settings you make. Fill-in the table on page 22 with your settings of the
controller.
.2 functionalities
The device has three operating modes :
normal mode
Display of the measured temperature and the programmed switching
thresholds. From the Normal mode, you can access the Calibration and
Simulation modes.
calibration mode
Access to the programming of all the parameters (unit, output, filter,
bargraph, temperature adjustment). From the Calibration Mode, you can
go back to the Normal Mode.
simulation mode
Entering a theoretical flow rate value to test the configuration pro-
grammed in the Calibration Mode. From the Simulation Mode, you can go
back to the Normal Mode.