Burkert 8400 Mode D'emploi page 10

4 installation
40 mm
ø 7,4 mm
ø 4,7 mm
All manuals and user guides at all-guides.com
4.1 General recommendations
Always check the chemical compatibility of the materials the controller is
made of with the products it may be in contact with, for instance: alco-
hols, strong or concentrated acids, aldehydes, bases, esters, aliphatics,
aromatics, ketones, aromatics or halogenated hydrocarbons, oxidizing
agents and chlorinated products. For more information, please contact
your Bürkert sales office.
4.2 mounting
1. Select the location of the holder on a wall, then drill 4 holes by
respecting the hole-to-hole distances indicated on the opposite
schematic and mount the holder using 4 screws.
Wall-mounted temperature controller 8400