Burkert 2060 Démarrage Rapide page 5

Type 2060, 2061
Basic safety instructions
4 BASIC SAFETY INSTRUCTIONS
These safety instructions do not take into account any
unforeseen circumstances and events which occur during instal-
lation, operation and maintenance.
The operator is responsible for observing the location-specific
safety regulations, also with reference to personnel.
Risk of injury from high pressure.
▶ Before working on the system or device, switch off the pres-
sure and ventilate or empty the lines.
Risk of burns or fire from hot device surfaces due to prolonged
operation.
▶ Do not touch the device with your bare hands. Keep away from
highly flammable substances and media.
Risk of injury due to moving parts in the device.
▶ Do not reach into openings.
Risk of injury due to bursting lines and device.
▶ Because of the risk of pressure surge, valves with the flow
direction above the seat must not be used for fluid media.
▶ Observe the type of flow and type of medium for operating
the device.
Risk of injury of parts being ejected out when opening the
actuator.
▶ Do not open the actuator.
All manuals and user guides at all-guides.com
General hazardous situations.
To prevent injuries, observe the following:
▶ Secure the device against unintentional activation.
▶ Only trained technicians carry out installation and maintenance
▶ Following an interruption in the power supply, ensure that the
▶ Only operate the device when it is in perfect condition.
▶ Observe general engineering standards and rules.
Please observe the following in order to protect against
damage to the device:
▶ Feed only those media listed in chapter "Technical data" into
▶ Do not mechanically load the device.
▶ Do not make any external modifications to the valves. Do not
work.
process is restarted in a controlled manner.
the medium ports.
varnish housing parts.
English
5