Table Of Specifications; Technical Description - Gumotex HALIBUT Manuel De L'utilisateur

User's Manual
• A recreational vessel designed for use on internal waterways with an expected wind strength reaching
Grade 4 on the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres inclusive, with
occasional waves up to 0.5 metres of height caused e.g. by vessels passing by.
• The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIB.
• Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your first vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenance
and control prior to your first individual use of the vessel so that it is safe
and comfortable. Your dealer or the National Yacht Federation or club
will recommend you appropriate training courses or qualified instructors.
Do not pull off until the expected sailing conditions (wind strength and
wave height) are appropriate for the construction category of your vessel
and you and your crew are able to control it in these conditions.
Please store this manual in a safe place and hand it over to the new
owner should you sell the vessel.
1. Table of Specifications
(indicative values)
Length (cm)
Width (cm)
Number of air chambers
Dimensions - packed in carry bag (cm)
Dimensions - packed in cardboard (cm)
Maximum operational pressure
Weight (kg)
Load (kg)
Maximum number of people
Draught (cm)
The highest anchor above surface (cm)
2. Technical Description - see Fig. 1
1. Side tube
2. Bottom
3. PUSH/PUSH valve - enables inflation/deflation, pressure
control, and pressure measurement by a pressure gauge
4. Relief valve
5. Manufacturer's label
6. Yellow "WARNING" label
7. Seat board
8. Inflatable seat with fishing rod mounts
9. Floor board
10. Bracket board
11. Mount for fixing the seat and the bracket board
12. Board
8
HALIBUT
KAYAK
Table of Contents:
1. Table of Specifications
2. Technical Description
3. Instructions for inflating the boat
4. Using the Boat
5. Folding the boat
6. Treatment and Storage
7. Guarantee Conditions
8. Boat Repairs
9. Product Disposal Method
1 0. Packaging Disposal Method
11. Manufacturer's Label
- legend of symbols used
12. Safety Caution
0,02 MPa [0,2 Bar/3 PSI]
13. Handle
14. Plastic handle
15. Safety rope
16. Safety rope tie-down
17. Baggage fixture
18. Bungee netting
19. Flexible rope with snap hooks
20. Rope loop for anchor fastening
21. Anchor rope
22. Anchor rope fixture with a D-ring
23. Rest fixture (on the cylinder)
24. Drainage hole
25. Flexible rope for paddle fixing
26. Flexible rope fixture
27. Skeg-fin and probe metal bracket fixture
VERSION 3/2021
GB
Page 8
HALIBUT
375
96
3 + 1
70 × 46 × 30
70 x 47,5 x 32
21
200
1
15
55
8
9
9
9
10
10
10
10
10
10
11