Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User's Manual
• A recreational vessel designed for use on internal waterways with an expected wind strength reaching
Grade 4 on the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres inclusive, with
occasional waves up to 0.5 metres of height caused e.g. by vessels passing by.
• The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIB.
• Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your fi rst vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenance
and control prior to your fi rst individual use of the vessel so that it is safe
and comfortable. Your dealer or the National Yacht Federation or club
will recommend you appropriate training courses or qualifi ed instructors.
Do not pull off until the expected sailing conditions (wind strength and
wave height) are appropriate for the construction category of your vessel
and you and your crew are able to control it in these conditions.
Please store this manual in a safe place and hand it over to the new
owner should you sell the vessel.
1. Table of Specifications
(indicative values)
Length (cm)
Width (cm)
Number of air chambers
Diameter of side tubes (cm)
Dimensions - packed in carry bag (cm)
Dimensions - packed in cardboard (cm)
Max. operating pressure - side tube
Max. operating pressure - bottom
Weight (kg)
Load (kg)
Maximum number of people
Draught (cm)
The highest anchor above surface (cm)
2. Technical Description
- See Picture 1
1. Sidewall cylinder
2. Bottom
3. PUSH/PUSH valve
- for infl ating/defl ating the kayak, regulating pressure and
measuring pressure using a manometer
4. manufacturer's label
5. yellow "WARNING" label
6. seat with a backrest
7. front footrest
8. deck
9. handgrip
10. drain hole
11. holes for the use of a rudder
12. safety rope attachment
8
RUSH 1, RUSH 2
TABLE OF CONTENTS:
RUSH 1
355
81
3 + 1
20
65 × 40 × 28
70 × 44,5 × 31
0,025 MPa [0,25 Bar / 3,75 PSI]
0,05 MPa [0,5 Bar / 7,2 PSI]
12
150
1
15
40
13. safety rope
14. metal reinforcement attachment
15. seat attachment (on the bottom)
16. backrest and footrest attachment (Rush 1 - on the
tubes)
17. footrest strap attachment
18. strap with Velcro for attachment of the cover deck (spe-
cial accessory, can be purchased)
19. directional fi n attachment
20. keel
21. reinforcement of the keel bottom section with a mem-
brane
22. baggage attachment
23. elastic rope with a snap-hook
24. rear footrest
25. attachment of metal reinforcement for fastening the
backrest and footrest(Rush 2 - on the tubes)
RUSH 2
420
82
3 + 2
20
69 × 48 × 28
72,5 × 55,5 × 32
0,025 MPa [0,25 Bar / 3,75 PSI]
0,05 MPa [0,5 Bar / 7,2 PSI]
15,5
195
15
40
VERSIOn 9/2019
GB
Page 8
8
9
9
10
10
10
10
10
10
10
11
2
Publicité
Chapitres
Table des Matières
