Publicité
Les langues disponibles
Les langues disponibles
UNDERSTANDING THE CONTROL BOARD
F/ C
CONTROL
F/ C
F/ C
Element
Element
PELLET VERTICAL SMOKER
-COPPERHEAD (WALMART)
F / C
COOK
200º
F/ C
PROBE 1
175º
FC
ACTUAL
FC
PROBE 2
150º
FC
PRIME
Element
SMOKE
F/ C
PROBE 1
FC
Element
PROBE 2
FC
Temp
Set/Act
Element
FC
Temp
Set/Act
Time
Smoke
FC
Time
Smoke
Temp
Set/Act
Temp
Set/Act
Time
Smoke
Time
Smoke
14
F/ C
Element
DESCRIPTION
COOK
When connected to a power source, the Power Button will glow blue. Press the Power Button to power on the unit. Once
PROBE 1
FC
the Power Button is pressed, the Digital LCD Screen will light up, displaying that it is ready to operate. Press and hold
ACTUAL
the button to turn the unit off.
PROBE 1
PROBE 2
FC
FC
The Temperature Switch Button is used to change the temperature readout on the Digital LCD Screen. Press the button
PROBE 2
to switch to Celsius (ºC) or to Fahrenheit (ºF), as preferred. Default is set to Celsius.
FC
The Element Light Indicator is used to display if the heating element is on or off. If the light glows, the heating element
PROBE 1
is working and is on. If the light is off, the element is off. The heating element will stay on if the ACTUAL temperature
FC
is below the SET temperature. Once the SET temperature is reached, the heating element will automatically turn off.
PROBE 2
The Digital LCD Screen is used as the information center for your unit. The Digital LCD screen will display your Desired
FC
225º 250º
Cook Temperature (SET), Actual Cook Temperature (ACTUAL), Meat Probe Temperature (if connected), and any error
300º
350º
messages. If only one Meat Probe is connected, only one reading will be displayed. Temperature can be displayed in
400º
COOK
either Fahrenheit or Celsius.
HIGH
PROBE 1
FC
ACTUAL
FC
The Adjustment Arrows allow you to increase or decrease the TIME and TEMP on the Control Board. Press and hold the
COOK
PROBE 2
Temp
FC
buttons to increase or decrease the value faster.
ACTUAL
FC
Time
Press the TEMP Button on the Control Board to adjust the cooking temperature.
•
Press once to select the temperature setting, then the adjustment arrows to change the temperature in five-degree
increments. Press once again to lock-in the temperature setting once the changes are finished.
The heating element will not turn on until TIME is also set. Default element temperature is set to 37ºC / 100 ºF.
Press the TIME Button on the Control Board to adjust the cooking time.
•
Press once to select the time setting, then press the adjustment arrows to change the hours. Changes are in 1
hour increments (ranging from 00-99).
•
Press once again to select the minutes setting, then press the adjustment arrows to change the minutes. Changes
are in 10 minute increments (ranging from 00-50).
•
Press twice to lock in the time setting once the changes are finished.
Press the SET/ACT Button on the Control Board to display the desired setpoint (SET) or the actual/current (ACT) time and
temperature. The display shows the actual (ACT) settings for TIME and TEMP by default.
•
To view the TIME and TEMP setpoints, press the SET/ACT button once. After 15 seconds, the display will switch
back to the actual (ACT) settings.
•
To change a setpoint, press the SET/ACT button once, followed by pressing TIME or TEMP. Next. press the
adjustment arrows to change the setting.
Press the SMOKE Button on the Control Board to manually turn on the heating element for a 20-minute cycle. "FS" will
appear on the screen, indicating "Fast Smoke". This is mostly used to recover lost smoke from opening the cabinet door,
or when starting a new smoke profile with freshly added wood chips.
•
To stop the cycle before the 20 minutes, press the SMOKE Button twice.
COOK
PROBE 1
FC
ACTUAL
FC
PROBE 2
FC
Temp
Set/Act
COOK
FC
Time
Smoke
ACTUAL
FC
COOK
ACTUAL
FC
Temp
Set/Act
Time
Smoke
Set/Act
Smoke
Temp
Set/Act
Time
Smoke
Temp
Set/Act
Time
Smoke
Temp
Set/Act
Time
Smoke
Publicité
