Publicité
3-5. Installing Brackets
3
1
2
Y Disconnect input power to
racks.
Assembly all clamps, plates and
brackets, to racks before tightening
hardware.
1
Upper Clamp, Plate And
Hardware (2 Pair)
Install front and rear clamp and plate
using 1/2−13 x 3 in screws and lock
nuts.
2
Lower Bracket (2)
3
Screw And Nut (8 Each)
Install front and rear lower bracket
using 3/8−16 x 1 in screws and nuts.
803 531-A
OM-213 592 Page 11
Publicité
