Publicité
3-1. Specifications For Dual Racks Used With CST 250/CST 280 Models
Input Power
Input Power
To Rack
220 VAC; 50/60 Hz; Three Phase
230 VAC; 50/60 Hz; Three Phase
400-460 VAC; 50/60 Hz; Three Phase
460-575 VAC; 50/60 Hz; Three Phase
3-2. Specifications For Dual Racks Used With Maxstar 200 Series Models
Input Power
Input Power
To Rack
230 − 460 Volts AC;
50/60 Hz; Three Phase
3-3. Selecting A Location
Dimensions And Weight
344 lb (156 kg)
Movement
SECTION 3 − INSTALLATION
51 in
(1295 mm)
1
36-1/2 in
(927 mm)
Maximum
2
Capacity
Capacity
1 − 8 Welding Power Sources
1 − 8 Welding Power Sources
1 − 8 Welding Power Sources
1 − 8 Welding Power Sources
Capacity
Capacity
1 − 8 Welding Power Sources
48-29/32 in
(1242 mm)
26-1/2 in
(673 mm)
24 in (610 mm)
Minimum Length
Both Branches
1
1
Lifting Eye
Y Do not lift dual rack from
single lifting eye.
Lift dual rack using a 2 branch sling
chain with hook safety latches.
2
Lifting Forks
If using lifting forks, be sure forks
are fully inserted in outer lifting
holes.
Inner pair of lifting holes may be
used if lifting fork span is not
sufficient.
loc_2 3/96 - 803 528-A
OM-213 592 Page 9
Publicité
