GYS SUPER PRO SMART EV CHARGE Manuel D'utilisation page 9

Operating manual
Do not subject the device to excessive impact, twisting or
crushing.
Store the device appropriately when it is not in use. Always
wrap the cables in a loop, do not twist/kink/bend them.
Be sure to follow the instructions in this manual to avoid the
risk of fire, electric shock, serious injury, or death.
Do not leave a charging vehicle unattended for long periods
of time.
EV charging mode:
• Mode 2
Power supply:
▪ The charger must be connected to an EARTHED power
supply.
Function to check the presence of a protective
conductor on the input circuit.
• The device may not work if used on a computer system
or any other ungrounded installation, such as an
insulated winding generator or isolation transformer.
• The connection to the power supply must be carried out
in compliance with national standards.
It is recommended that the electrical installation intended
for EV charging is inspected by an experienced electrical
installer.
Maintenance:
• Do not use solvents or any agressive cleaning products.
• Clean the surfaces of the unit with a dry cloth.
Regulations:
• Equipment complies with European directives
• The Declaration of Conformity is available on our website.
• This equipment conforms to UK requirements.
• The UK Declaration of Conformity is also available on our
website (see cover page).
• This device complies with Moroccan standards.
• The C‫( م‬CMIM) declaration of conformity is available on
our website.
Disposal:
• This machine is subject to selective collection. Do not
dispose of in domestic waste.
Translation of the original
instructions
SUPER PRO SMART EV CHARGE
9