GYS SUPER PRO SMART EV CHARGE Manuel D'utilisation page 8

Operating manual
SAFETY INSTRUCTIONS
This user manual includes operation instructions, and the
safety precautions to be followed by the user. Please read it
carefully before first use and keep it for future reference. These
instructions must be read and fully understood before use. Do
not carry out any alterations or maintenance work that is not
directly specified in this manual. The manufacturer shall not
be liable for any damage to persons or property resulting from
use not in accordance with the instructions in this manual. If
you have any problems or queries, please consult a qualified
person to correctly operate the equipment. This device may
only be used for Hybrid Electric Vehicle (HEV) charging within
the limits indicated on the device and in the manual. The safety
instructions must be followed. The manufacturer cannot be
held responsible in the event of improper or dangerous use.
This device provides additional protection in the absence of
any verification of the conformity of the power supply wiring, or
the presence of a functional RCD (Residual Current Device)
with a rated operating differential current not exceeding 0.03A
upstream.
Do not use the charger if the mains cable or plug is
damaged.
Do not use the device if the charging cable is damaged or
has a faulty connection, in order to avoid the risk of short-
circuiting the vehicle.
Do not cover the device while it is in use.
Do not remove the mains plug from the device and replace it
with a different one. Only use accessories sold by GYS, with
no user modifications.
The device must not be used if it does not operate correctly
in accordance with the manual. If this is the case, please
seek advice from the manufacturer, the relevant distributor,
or an electrician.
The device must not be stored or used beyond the specified
operating conditions, and be protected against misuse, such
as dropping, submersion, etc.
The device must be connected without the use of a power
adapter, unless it is part of the original product or supplied
accessories.
The device must be connected directly to the power
socket, without the use of an additional cable (extension
cord/multiplug etc.).
Cables and components must not be removed/
disconnected while the product is in use.
8
Translation of the original
instructions
SUPER PRO SMART EV CHARGE