GYS SUPER PRO SMART EV CHARGE Manuel D'utilisation page 13

Operating manual
TROUBLESHOOTING
Troubleshooting
Electrical fault.
Residual current detected in
electrical installation (>30mA).
+
Accessory fault.
+
Thermal protection.
+
WALL MOUNTING (SCREWS NOT INCLUDED)
WARRANTY CONDITIONS
The warranty covers any defects or manufacturing faults for two years from the date of purchase (parts and labour).
The warranty does not cover:
• Any other damage caused during transport.
• The general wear and tear of parts (i.e. : cables, clamps, etc.).
• Incidents caused by misuse (incorrect power supply, dropping or dismantling).
• Environment-related faults (such as pollution, rust and dust).
In the event of a breakdown, please return the item to your distributor, along with:
- a dated proof of purchase (receipt or invoice etc.).
- a note explaining the malfunction.
Translation of the original
instructions
Causes
SUPER PRO SMART EV CHARGE
Solutions
- Check your electrical installation and follow
the relevant electrical recommendations for
this type of product.
This error will only disappear after the
electrical installation has been brought into
conformity.
- The attachment connected to the device is
not a GYS accessory.
- Defect in the accessory. Contact your
dealer / service agent.
- Ambient temperature too high, ventilate the
room and let the charger cool down.
The load will automatically restart as soon
as the temperature is lower.
13