Power On/Off - Steinberg Systems SBS-KW-1000/10O Manuel D'utilisation

Key Name
Hold
Acc.
Del. Delete last weight / clear all weight. Left scroll digit
F1 View accumulated weight. Input decimal point.
F2
Off
2nd
EN
DISPLAY MESSAGES BY NORMAL USE
Message Stand for
SETUP
BATTERY
END
OFF
OVERLOAD
ERROR
ACCUMULATE
REV. V 2016
Function
Lock/unlock.
Confirmation.
Accumulate weight. Decrease digit.
Unit switch.
Press: entering into weighing mode.
Longer pressing: turn the scale off.
„2nd" function.
Note
detect weight
user setup menu
battery life percentage
save and exit
power off
Overloading
invalid operation
accumulate weight
22
Scale key Message
OPERATION

POWER ON/OFF

Press for 1s to power-on scale. Scale perform initialization and power-on test, "0.0.0.0.0" shows twice,
then capacity 1000 shows, battery life percentage bat99 shows, weight detection ----- shows and then auto
zero.
For information about Auto-Zero, refer to Scale Configuration.
Press or
and then cut off power.
Zero
Press or
If load is in motion, or tared, or out of Manual-Zero Range, |err| shows.
For information about Manual-Zero Range, refer to Scale Configuration.
Tare IN/OUT
In gross mode, press
Sollte sich das Gewicht in Bewegung, im negativen Bereich oder außerhalb des Tara-Bereichs befinden, so
zeigt die Waage |err| an.
If load is in motion, or negative, or out of Tare Range, |err| shows. Tare will re¬duce the apparent overload
range of scale. For example, if a 5000*2kg scale has a 1000kg container as its tare, the scale will overload at
a new weight of 4018kg (5000 – 1000 + additional 9 divisions).
In net mode, press
LOCK/UNLOCK
Press or
Press or
REV. V 2016
Stand for
DELETE
CLEAR
for 1s to power-off scale. Battery life percentage bat90 shows, off message |off| shows,
,to zero. ZERO light on.
or ,to tare in. TARE light on.
or , to tare out. TARE light off.
, to lock screen. HOLD light on.
, to unlock screen. HOLD light off.
23
Note
delete last weight
delete all weight
EN