Steinberg Systems SBS-KW-1000/10O Manuel D'utilisation page 10

Product name: CRANE SCALE
Model: SBS-KW-1000/10O
Manufacturer name: emaks spółka z ograniczoną odpowiedzialnością sp.k.
Manufacturer address: ul. Dekoracyjna 3, 65-155 Zielona Góra
EN
USER'S GUIDE
This scale is a combination of sound and proven mechanical design, with today's most advanced electronics
to provide a superb feature set. It is versatile, reliable, accurate and easy to operate.
• Superb Quality – strictly in accordance with European CE directives.
• Great Safety – Auto-Off function, Standby function
• Strong Reliability – Cutting-edge technology, quality integrated circuit for high perfor
mance and longtime stability.
• Broad Applicability – Popular and applicable in storage, textile, metallurgy industry, and so
forth.
General safety information for the use of our scale
For good performance and precise measurement, be careful with daily operation and maintenance.
• Do NOT overload scale. This will damage load cell and void warranty.
• Do NOT leave load hung on the scale for long. This will decrease scale's accuracy and shorten
load cell's life.
• Inspect shackle and hook before using. Check clips, pins and screws regularly.
• Check battery frequently. When scale runs out of power, charge battery with its dedicated
charger or replace it with a full one.
• Rotate load rather than scale if needed.
• Do NOT use scale under thunder or rain.
• Hang scale on shelf in dry and well-ventilated room. Do NOT place scale on the ground directly.
• Do NOT attempt to repair scale yourself. Contact your local representative.
BEFORE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3 days, and document the damages as detailed as
possible. Do not turn the package upside down! When transporting the package, please ensure that it is kept
horizontal and stable. The various items used for packaging (cardboard, plastic straps, polyurethane foam)
should be conserved, so that the device can be sent back to the service centre in the best condition in case
of a problem!
REV. V 2016
19
EN