Turning Off The Scale; Battery Charging - Steinberg Systems 3110 Mode D'emploi

Please operate as follows:
1. Put the goods A on the scale pan, the weight window will display "1.500" (kg).
Input the unit price "5.00" (EUR/kg), the amount window will display "7.50"
(EUR);
2. Press key [ADD], the adding indicator lamp will light up to indicate the scale is
under adding mode. The weight window will display "Add01", and the amount
window will display "7.50" (EUR).
3. Remove the goods A and wait for that the scale returns back to the weighing
mode;
4. Put the goods B on the scale pan, the weight window will display "0.700" (kg),
then input the unit price "8.00" (EUR/kg), the amount window will display
"5.60" (EUR);
5. Press key [ADD], the adding indicator lamp will light up to indicate the scale
is under adding mode. The weight window will display "Add", the unit price
window will display "02", and the amount window will display"13.10"(EUR).
You can continue the adding operation as the above steps up to 99 times.
5.7 Clearing
Under the adding mode, press key [CLR], the unit price window will display "Clr",
and the adding indicator lamp will be out which indicates that the scale is not in
adding status.
EN
Under non-adding mode, if you input the wrong unit price, press key [CLR] and
input the correct unit price;
5.8 Zero
The weight window does not display "0.000" when unloaded, please press key
[ZERO] (within the range of ±60d).

5.9 Turning off the scale

Please press key [ON/OFF] and then pull power plug out.
6. ENVIRONMENT TEMPERATURE
Transportation and storage: -25℃~ +50℃
Work: 0℃ ~ + 40℃
7. ENVIRONMENT HUMIDITY
Transportation and storage: <70% R H (Non-dew)
Work: <90% R H (Non-dew)

8. BATTERY CHARGING

Please charge the storage battery in time after using it to avoid damage. The
charge time should be at least 1.2hours for using one hour. If the scale will be not
used for a long time, please do not forget to charge the scale for consecutive 24
hours every 2 or 3 months to avoid damage caused by self-discharge of storage
24
battery (when the scale is connected to AC power, the system will charge the sto-
rage battery automatically whether the scale is turned on or off. It is advised to
charge the electronic scale after it is turned off).
9. PRECAUTION
Never put the electronic scale in the rain or flush it with water. Particularly the
inner parts of the scale should avoid water.
It is forbidden to put the scale in the place with high temperature or humidity.
Avoid any strong shock or heavy weight. Don't put any article or give pressure
over maximum capacity on the scale pan even the scale is not in use.
Wrong wires connection of storage battery is forbidden.
Right connection: Red wire should be connected with red end; Black wire should
be connected with black end.
10. TROUBLESHOOTING
Failure Description
AC indicator lamp Failure to connect
doesn't light up with the AC power
While using sto- No DC power in
rage battery, no the scale
display and sound
when turning on
Display "—Lb—" Insufficient of vol-
with alarm sound tage of battery
and turn itself off
automatically
Unstable weighing Insufficient of
display voltage or get
damped
Possible reason Solution
1. Poor contact 1. Insert the plug
with the power well or change
plug socket
2. Broken power 2. Change power
cord cord
3. Blown fuse 3. Change fuse of
the same type
1. Damaged sto- 1. Change the
rage battery, no storage battery of
voltage the same type
2. Wire's poor 2. Contact wire
contact with sto- with battery well
rage battery (note: color cor-
responding)
Too long use of Charge the scale
battery by connecting
with the AC power
supply
Continue to use Charge the scale
the battery when for 10 hours by
the scale gives connecting with
alarm sound of in- the AC power
sufficient voltage supply or clean
or the environ- the main board
mental humidity and dry it
is too high
25
EN