Hdd Manage; Network Setup; Network Service - gigamedia GGM CCKIT2C Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN

4.5 HDD manage

Configure and manage the hard disk. The menu displays current hard disk in-
formation: hard disk number, input port, type, status and overall capability. The
operation include: setup the write-read disk, read-only disk, redundant disk, hard
disk format, resume default. Choose the hard disk and click the right function
button to execute.
Note: "Write-read disk" The equipment can write or read data.
"Read-only disk" The equipment can read data but can not write data.
"Redundant disk" Double backup the video files in the write-read disk.
Picture 4.3 Hard disk management

4.6 Network setup

[Network card] You can choose cable network card or wireless network card.
[DHCP Enable] Obtain IP address automatically.
Note: DHCP server is preinstalled.
[IP address] Set the IP address. Default: 192.168.1.10.
[Subnet mask code] Set the subnet mask code. Default: 255.255.255.0.
[Gateway] Set the default gateway. Default: 192.168.1.1.
[DNS setup] Domain Name Server. It translates the domain name into IP ad-
dress. The IP address is offered by network provider. The address must be set
and reboot then it works.
Picture 4.4 Network setup
[TCP port] Default: 34567.
[HTTP port] Default: 80.
[Max Connection] Network user connection number , the set range is 0-10.
[LAN Download] Internet High-Speed Download.
[Network transmission strategy] There are three strategies: self-adaption, image quality precedence and fluency precedence.
The code stream will adjust according to the setup. Self-adaption is the tradeoff between the image quality precedence and fluency
precedence. Fluency precedence and self-adaption are valid only when the assistant code stream is turned on. Otherwise image
quality precedence is valid.

4.6.1 Network service

Advanced network functions on the configuration, double-click the [Net Service]
button to enter the Picture 4.5 interface, first select the Network Services entry
and click the Settings button, or double-click the service parameter configuration
items.
Picture 4.5 Network service
[PPPoE setup]
Input the user name and password that ISP (Internet service provider) provides.
After saving it reboot up your system. Then the DVR will build a network connec-
tion based on PPPoE. The IP address will change into dynamic IP address after
above operation is well done.
Operation: After PPPoE dialing successfully look up the IP address in the [IP ad-
dress] and obtain the current IP address. Then use this IP address to visit the
DVR through user port.
Picture 4.6 PPPOE setup
www.gigamedia.net
45

Publicité

Chapitres

Table des Matières
loading

Table des Matières