EN
3.5.7 System information
System Information menu items include: Hard Disk information, Log information, Stream Statistics, Online Users, and
Version information.
3.5.7.1 Hard Disk information
Display the hard disk state: hard disk type, overall capability, residual capability,
the recording time and so on.
Notice: "O" means that the hard disk is normal. "X" means that the hard disk is
broken-down. "-" means that there is no hard disk. If the user need to change
the damaged hard disk, you must shut down the DVR and take up all the dama-
ged hard disks then install a new one.
" * " behind serial number means the current working disk such as 1*. If the corres-
ponding disk is damaged, the information will display "?".
Picture 3.17 Hard disk information
3.5.7.2 Log information
Look up system log according to the set mode.
Log information include: system operation, configuration operation, data mana-
gement, alarm affair, recording operation, user management, file management
and so on. Set the time section to look up and click the look up button. The log
information will display as a list. (one page is 128 items) Press Page up or Page
down button to look up and press delete button to clear all the log information.
Picture 3.18 Log information
3.5.7.3 Code stream statistics
Display the code stream (Kb/S) and hard disk capability (MB/H) in real time. It dis-
plays as the wave sketch map.
Picture 3.19 Code stream statistics
3.5.7.4 Online user
Look up the network user information in the local DVR. You can choose the net-
work user and cut the connection. Then the user is locked until next boot-strap.
Picture 3.20 Online user
www.gigamedia.net
42