Open-Package Check And Cable Connection; Open-Package Check; Frame Installation; Front Panel - gigamedia GGM CCKIT2C Mode D'emploi

2. Open-package check and cable connection

2.1 Open-package check

When you receive the DVR, please check first .
First, please check whether there is any visible damage to the package appearance. The protective materials used for the
package of the DVR can protect most accidental clashes during transportation.
Then, please open the box and get rid off the plastic protective materials. Check whether there is any visible damage to
the DVR appearance.
At last, please open the machine crust and check the data wire in the front panel, power wire, the connection between the
fan power and the main board.
(1). Front panel and rear panel
The key function specification in the front panel and the interface specification in the real panel are in the specification.
Please check the product type in the front panel whether is accordant with the product type you order.
The label in the real panel is very important for the after service. Please protect it carefully. When you contact us for
after service, please provide the product type and serial number in the label.
(2). After open the case should be checked
In addition to checking whether there are obvious signs of external damage, please note that before the inspection panel
data lines, power lines and motherboard connection is loose.

2.2 Frame installation

The specification of machine box is standard 1U.It can be installed in the standard frame.
Installation approach and notice:
1. Mare sure the house temperature under 35°C (95°f).
2. Keep the DVR away from other equipments at least 15 centimeters (6 inches).
3. Frame installation from bottom to top.
4. If installing multiple components in the frame, take precaution to avoid the overload of the jack.

2.3 Front panel

Recording indicator light
Power indicator light
www.gigamedia.net
Cancel button
Network indicator light
Menu & confirm button
EN
33