gigamedia GGM CCKIT2C Mode D'emploi page 47

[FTP]
FTP used when there get alarm,or alarm linkage to recording,snap pictures, you
can specify the FTP server to upload video and capture specific images.
Enable: Select "■" enable the FTP function.
Server IP: FTP server's IP address
Port: FTP set up the domain when the port number, default port 21.
User name: Permission to log FTP user name.
Password: User's password.
Max File Length: Upload files for each package the max length, default is 128M.
DirName: Upload file directory.
[Wireless config]
Dial-up Internet access through 3G card to realize the client access device, the
device configuration (Note: only for some models)
Enable: Select "■" enable the Wireless function.
Type: Dial type, the default auto.
Wireless AP: 3G access point, the default OK.
Dial Number: 3G dial-up number, the default OK
User Name: Dial-up of 3G User Name.
Password: Dial-up user's password.
IP Address: Dial-up IP address number obtained.
[Mobile monitor]
Access through mobilephone, mapping the port on the Router. By agreement of
the client device monitoring and operation.
Enable: Select "■" enable the Mobilephone function.
Port: Port for mobilephone view, need mapping the port on Router.
[UPNP]
UPNP protocol will be automatic port forwarding on the Router,before use this
feature, make sure UPNP feature is enabled on the router.
Enable: Select "■" enable the Mobilephone function.
HTTP Port: Router automatically assigns the device port number, while browsing
by IE, need add the port number.
TCP Port: Router automatically assigns the device port number, while use the
client software to monitor, required by the port number
Mobile Port: Router automatically assigns the device port number, mobilephone
monitoring through the port number.
www.gigamedia.net
Picture 4.11 FTP
Picture 4.12 Wireless config setup
Picture 4.13 Mobile monitor setup
Image 4.14 UPNP GIGAMEDIA MENU
EN
47