Record Mode & Record Setup; Hdd Setup - gigamedia GGM KITIPNVR Manuel D'utilisation

2.7. Record Mode & Record Setup

2.8. HDD Setup

www.gigamedia.net
Setup recording and audio for each
channel; please tick the mark « √ » to
enable recording and audio.
There are two record modes: Always /
Schedule.
For ease, setup one channel and then
copy to the others, as shown against.
HDD Information: You can check the
HDD capacity and HDD quantity in the
HDD setup.
HDD Format: tick « √ » under format,
and then click « Format ».
Note: The newly installed HDD must
be formatted through our NVR before
usage.
Overwrite: There are three options to
choose from ; « by days », « by capa-
city » and « never ». Please selects
desired method.
After the setup of disk, save and confirm
interface will be shown on screen and
click « Save to log out ».
After the completion of setup wizard,
NVR can be worked properly. If persona-
lized settings are needed, you can login
to the menu to setup. As shown against.
EN
21