Renfert SYMPRESS II Mode D'emploi page 19

2.6 Liability Exclusion
Renfert GmbH shall be absolved from all claims for damages or warranty if:
► The product is employed for any purposes other than those cited in the operating instruc-
tions;
► The product is altered in any way other than those alterations described in the operating
instructions;
► The product is repaired by other than an authorised facility or if any but Renfert OEM parts
are employed;
► The product continues to be employed, despite obvious safety faults or damage;
► The product is subjected to mechanical impacts or is dropped.
► We do not accept any liability for damage caused by mixing tips, foil bags or cartridges split-
ting.
3. Product Description
3.1 General Description
The SYMPRESS II unit for mixing impression materials facilitates extrusion and mixing of 2-component
dental impression materials.
5:1 cartridges or foil bags in cartridge holders from different manufacturers can be used in the unit.
Impression materials marked with the symbols
relevant mixing programme in the SYMPRESS II.
The mixing programs control the feed rate of the pressure discs and the rotational speed of the hexag-
onal head.
Only mixing nozzels should be used which are designated to the impression material by the
manufacturer.
or can be extruded in double the speed with the
- 5 -
EN