Publicité
Les langues disponibles
Les langues disponibles
Never move the head or the table while the machine is
running.
If a work piece overhangs the table such that it will fall or tip if
not held, clamp it to the table or provide auxiliary support.
Do not use wire wheels, router bits, shaper cutters, circle
cutters, or rotary planers on this drill press.
3.3 Remaining hazards
When using the machine according to regulations some
remaining hazards may still exist.
The rotating drill bit can cause injury.
Thrown workpieces and workpiece parts can lead to injury.
Dust, chips and noise can be health hazards.
Be sure to wear personal protection gear such as safety
goggles, ear protection and dust mask. Use a suitable dust
collection system.
The use of incorrect mains supply or a damaged power cord
can lead to injuries caused by electricity.
4. Machine specifications
4.1 Technical data
Spindle to column
Spindle travel
Spindle taper
Drill capacity in steel (St37)
Column diameter
Table size
T-slot size
Table tilt
Distance spindle nose to table
Distance spindle nose to base
Number of speeds
Range of speeds I
Range of speeds II
Overall L/W/H
Net weight
Mains
Output power
Reference current
Extension cord (H07RN-F)
Installation fuse protection
4.2 Noise emission
(Inspection tolerance 4 dB)
Acoustic pressure level (according to EN ISO 11202):
Idling
In operation
180mm
90mm
MT-2
16mm
80mm
285 x 285 mm
12mm
360°
455mm
645mm
variable
150 – 1000 rpm
350 – 2500 rpm
630x350x1090 mm
88 kg
230V ~1L/N/PE 50Hz
1.2 kW (1.6 HP) S1
8 A
3x1.5mm²
10A
LpA 69,6 dB(A)
LpA 79,0 dB(A)
378VB
The specified values are emission levels and are not
necessarily to be seen as safe operating levels.
As workplace conditions vary, this information is intended to
allow the user to make a better estimation of the hazards and
risks involved only.
4.3 Content of delivery
Machine base
Column and bracket assembly
Head assembly
Table
Table bracket lock handle
Table rising handle
3 down feed handles
16mm keyless chuck, B18
MT-2 / B18 arbour
Chuck guard
Drift key
Operating tools
Assembly kit
Operating manual
Spare parts list.
4.4 Description of the machine
5
Fig 1
Publicité
