Timer Mode (Individual Pet) - Petsafe 1000 Série Manuel D'utilisation

Timer Mode (Individual Pet)

Timer Mode under each pet allows you to set the Dog Door to one of the other access options (In/Out, In-Only, or Out-Only) for that specific pet at
specific times of the day . This is useful if you want a certain pet to have a different access than other pets during a specific time period (for example
at night) . There are four programmable time slots available for each pet with a minimum of two programmed times required . The two times are
required to prevent your pet from accidentally being locked out or in .
To Set Timer Mode:
1 . From Main Menu select Setup > Pet Settings > Pet 'X' (or pet's
name) > Mode .
2 . Press right arrow key to scroll to Timer option to select .
3 . Once Timer Mode has been selected, Access Time will appear at the
bottom of the pet's menu list . Use down arrow key to highlight Access
Time then right arrow key to select .
4 . The Access Time screen will list four available time slots . Press right arrow
key to select first time slot .
5 . The first line listed on Access Time menu is to select the pet access mode .
Use right arrow key to scroll through and select desired pet access mode:
In/Out, In-Only, or Out-Only .
6 . Use down arrow key to highlight Time . Press right arrow key to enter
specific time for your pet to have type of access you just selected in
Step 5 . After you use arrow keys to enter desired time, press enter key to
accept . Press left arrow/back key to return to Access Time menu screen .
7 . Use down arrow key to highlight second time slot . Press right arrow key
to select . Repeat Steps 5 & 6 to select pet access mode and schedule
time for the access . Repeat steps for as many times as you want to
schedule . Remember a minimum of 2 programmed times are
required but up to 4 time slots are available . After you select and enter
desired access options and scheduled times, review the Access Time
menu screen to make sure what you entered is correct .
If 2 time slots have NOT been programmed, you will receive an
error screen. The Pet Access Mode will then default back to In/
Out Mode.
Timer Mode Example: It might be helpful to think of Timer Mode in the form of a 24 hour or clock timeline . If you want your pet to have full
access during the daytime (for example, from 7 am in the morning until the late evening) but want your pet indoors at night (for example, starting at
7 pm), you would want to set that specific pet's access mode to In/Out at 7 am and to In-Only Access mode at 7 pm .
12 am
10
7 am
In-Only
In/Out
After using Timer Mode to program the example listed,
this is what the Access Time menu screen would display:
www.petsafe.net
12 pm
Example:
7 pm 1 1 pm