Low Battery Mode; Language; Pet Settings; Master Access - Petsafe 1000 Série Manuel D'utilisation

Low Battery Mode

When powered by the rechargeable battery, the Dog Door enters Low Battery Mode before the battery
becomes too low to properly operate the flap . An alert will appear on the LCD Screen when the Dog Door
enters Low Battery Mode . In Low Battery Mode, the flap shutdown position can be set to either Open or Locked .
Also an optional audible beep can be set to notify you when the battery is low . The factory settings for Low
Battery Mode are Locked for the flap shutdown position and Off for the audible beep .
To Change Low Battery Mode:
1 . From Main Menu select Setup > Door Settings. Use down arrow
key to highlight Low Battery Mode . Press right arrow key to select .
2 . Use down arrow key to highlight which setting to change . Use right
arrow key to change the setting . Press left arrow/back key to return to
Main Menu .

Language

The default language setting is English . The Language screen allows the language to be changed .
To Change Language:
1 . From Main Menu select Setup > Door Settings . Use down arrow
key to highlight Language and right arrow key to select .
2 . Use up and down arrow keys to highlight desired language . Press right
arrow key to change language . Press left arrow/back key to return to
Main Menu .
The Dog Door allows you to set the same access option and settings for all pets with the Master Access option or to set access and custom settings
by individual pet within the Pet Settings menu .
To open the Pet Settings menu, from the Main Menu select Setup> Pet Settings . The Pet Settings screen displays the following options:
Master Access: Easily allows the same pet access mode and pet settings
to be set for all pets . This is the default factory pet setting for all pets when
first programmed to the Dog Door .
Add Pet: Allows additional pets to be programmed to the Dog Door with
the purchase of additional Passport
to 20 pets can be programmed .
All pets that have been successfully programmed to the Dog Door will also
show under Pet Settings menu below Add Pet .

Master Access

With Master Access, you can easily set the same access option and settings for all pets programmed without the need to individually program by
pet . Master Access is the default access setting when pets are first programmed . Door Operational Mode must be set to Smart Mode for Master
Access setting to work (see "Door Operational Modes") .
To open the Master Access menu from Main Menu select Setup > Pet Settings > Master Access . Under the Master Access menu you will find
the following options:
Mode: Access mode for any pet set to Master Access . There are four
access modes: In/Out (which is default factory setting), In-Only, Out-
Only, and Timer .
Re-latch Time: Amount of time the multi-point Locking U-Flap system
takes to re-latch and lock once a Passport
applies to any pet set to Master Access .
In-Tone: Optional audible tone that sounds when any pet set to Master

PET SETTINGS

™ Key accessories (sold seperately) . Up
™ Key is no longer detected . This
www.petsafe.net 5