Relearn Pet; Remove Pet; Pet Tracking - Petsafe 1000 Série Manuel D'utilisation

Relearn Pet

If for some reason a dog has to be reprogrammed (for example, if replacing a dog's Passport
Dog Door to replace the previously stored code of the Passport
proceeding, make sure your pet's Passport
reprogrammed .
Note: Any other Passport
To Relearn Pet:
1 . From Main Menu select Setup > Pet Settings > Pet 'X'
(or Pet Name) > Relearn Pet .
2 . Hold your pet's Passport
of main flap and parallel to flap . Patiently hold key in this position
and wait for it to program during 30 second countdown . DO NOT
HOLD KEY AGAINST FLAP . It is very important Passport
programmed at least 13 cm to 15 cm from flap so the Dog Door
will consistently read the key when worn by your pet . When pet is
successfully reprogrammed, you will hear 3 beeps and LCD screen will return to the pet's menu . Press left arrow/back key to return to Main
Menu .

Remove Pet

Removing Pet allows a pet to be deleted from the Dog Door with all programmed settings removed . Removing a pet cannot be undone . Please make
sure you want to remove a pet before completing these steps .
To Remove Pet:
1 . From Main Menu select Setup > Pet Settings > Pet 'X' (or pet's
name) > Remove Pet .
2 . A confirmation screen will appear . Use up arrow key to highlight Yes
and press right arrow key to remove pet .

Pet Tracking

To easily know if your pet is in or out, the Main Menu screen shows at-a-glance the current location of each pet programmed to the Dog Door .
Also you can view your pet's history to see the last four dates and times your pet used the Dog Door and whether your pet came in or went out .
Pet Tracking only works when the Door Operational Mode is in Smart Mode and your pet is wearing the
programmed Passport Key .
™
Note: Location is based on last time pet used the Dog Door and the Passport
displayed may not be correct if a pet is let out or in using a different opening other than the Dog Door .
To View Pet Location:
From Main Menu the list of pets programmed displays . Use down arrow key to find the pet you wish to view .
The pet's current location of In or Out is listed next to the Pet Name .
To View Pet History:
From Main Menu use down arrow key to find pet you wish to view . Highlight name and press right arrow key to select . The last 4 dates and times
your pet used the Dog Door, along with the locations, are displayed .
12
Key is nearby since reprogramming pet is time sensitive with 30 seconds for the pet to be
™
Key accessories near the Dog Door will prevent proper programming .
™
™ Key 13 cm to 15 cm away from center
Key with the new key's code while keeping the pet's programmed settings . Before
™
Key is
™
™ Key was detected . The location
www.petsafe.net
Key), Relearn Pet allows the Passport
™
Intelligent
™