Timer Mode (Individual Pet) - Petsafe Passport PPA19-20558 Manuel D'utilisation

Timer Mode (Individual Pet)

Timer Mode under each pet allows you to set the Cat Flap to one of the other access options (In/Out, In-Only, or Out-Only) for that specific pet at
specific times of the day This is useful if you want a certain pet to have a different access than other pets during a specific time period (for example
at night) There are four programmable time slots available for each pet with a minimum of two programmed times required The two times are
required to prevent your pet from accidentally being locked out or in
To Set Timer Mode:
1 From Main Menu select Setup > Pet Settings > Pet 'X' (or pet's
name) > Pet Access > Mode
2 Press right arrow key to scroll to Timer option to select
3 Once Timer Mode has been selected, Access Time will appear at the
bottom of the pet's menu list Use down arrow key to highlight Access
Time then right arrow key to select
4 The Access Time screen will list four available time slots Press right arrow
key to select first time slot
5 The first line listed on Access Time menu is to select the pet access mode
Use right arrow key to scroll through and select desired pet access mode:
In/Out, In-Only, or Out-Only
6 Use down arrow key to highlight Time Press right arrow key to enter
specific time for your pet to have type of access you just selected in
Step 5 After you use arrow keys to enter desired time, press enter key to
accept Press left arrow/back key to return to Access Time menu screen
7 Use down arrow key to highlight second time slot Press right arrow key
to select Repeat Steps 5 & 6 to select pet access mode and schedule
time for the access Repeat steps for as many times as you want to
schedule Remember a minimum of 2 programmed times are
required but up to 4 time slots are available After you select and
enter desired access options and scheduled times, review the Access
Time menu screen to make sure what you entered is correct
If 2 time slots have NOT been programmed, you will receive
an error screen. The Pet Access Mode will then default back to
In/Out Mode.
Timer Mode example: It might be helpful to think of Timer Mode in the form of a 24 hour or clock timeline If you want your pet to have full
access during the daytime (for example, from 7 am in the morning until the late evening) but want your pet indoors at night (for example, starting at
7 pm), you would want to set that specific pet's access mode to In/Out at 7 am and to In-Only Access mode at 7 pm
12 am
10
7 am
In-Only
In/Out
After using Timer Mode to program the example listed,
this is what the Access Time menu screen would display:
www.petsafe.net
12 pm
example:
7 pm 1 1 pm