Publicité
Hook spring into hole of clevis pin (H-17). Stretch spring (P-11) into position with
5.
a needle-nose pliers.
6.
Attach rim to board as shown.
NOTE:
DO NOT use washers
here on spring return
style rims.
Refer to instructions included
with rim hardware for rim
WARNING!
USE EYE PROTECTION
WHEN INSTALLING
SPRINGS.
NOTE:
assembly.
P-11
Included with
Rim Hardware
Included with
Rim Hardware
9
H-17
WARNING!
TWO PEOPLE REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING COULD
RESULT IN SERIOUS INJURY
AND/OR PROPERTY DAMAGE.
11/04
P/N 21412507
Publicité
