Conrad Electronic WS222 Notice D'emploi page 65

Deleting the MIN/MAX values
The extreme values can either be deleted in the group (all minimum or all maximum values) or
individually.
Delete single value
• Press the MIN/MAX key once to display the minimum values or twice to display the maximum
values.
• Select the value you want to delete by activating the SENSOR key.
• Press and hold the RESET key longer than two seconds to delete the value selected.
Delete group
• Press the MIN/MAX key once to display the minimum values or twice to display the maximum
values.
• Press the RESET key longer than two seconds to delete the group selected.
Setting the contrast of the LC display
The contrast of the LC display can be set according to your requirements. For doing this, an opening
for setting the contrast is located between the suspending ear and the battery compartment on the
back side of the weather station. Using a small flat-blade screwdriver you can set the desired display
contrast.
Do not use force in doing so, turn the setting controller very carefully!
65