Publicité
Les langues disponibles
Les langues disponibles
b) Operation
Selecting the indoor temperature indication
In the normal operation mode, the indoor temperature and air humidity are presented in the IN display
field.
Press the IN key repeatedly to switch between
• indoor temperature
• corresponding dew point (= DEWPOINT)
Selecting the outdoor temperature indication
In the normal operation mode, the outdoor temperature and air humidity are presented in the OUT
display field.
Press the OUT key repeatedly to switch between
• outdoor temperature
• corresponding dew point ( =DEWPOINT)
• perceived temperature (=WINDCHILL)
Selecting the outdoor sensor
In the Sensor display field the currently selected outdoor sensor and its sensor number are shown.
Only active sensors (received in the synchronisation phase) are indicated.
To select the outdoor sensors or the multi-purpose sensor, press the SENSOR key as often as it is
required to indicate the sensor number desired.
• For the outdoor sensors 1-8 the corresponding sensor number (1-8) is displayed.
• For the multipurpose sensor a sensor number will not displayed, the faded in SENSOR (beside
the outdoor air humidity) will disappear.
Indicating the MIN/MAX values
The minimum and maximum values obtained for the measured values of the indoor/outdoor
temperatures and air humidity since the last deletion of data are saved.
For the wind speed measurement, only the MAX value is saved.
All MIN and MAX values are saved together with the corresponding times and dates of
the extreme values.
If the MIN/MAX keys are pressed several times, the display will switch between the indication of the
minimum values, the indication of the maximum values and the normal display.
63
Publicité
